S-Series Pump

S3-Series Pump

The D'MAND Kontrols® S3-Series converts standard plumbed homes into D'MAND Kontrols® Systems. At the push of a button, the S3-Series pumps cold water sitting in the hot water line into the cold water line and back to the water heater. The "temperature sensor" automatically shuts off the pump allowing the pump's IFC (Integral Flow Control) Valve to close when hot water arrives at the fixture. Now you have hot water within seconds at the fixture and anywhere else plumbed off of the main line.

The S3 series models are recommended for use with standard plumbing systems in homes up to 4,000 square feet with a tank type water heater. They are suitable for use in most homes and small businesses. The weight is 9 lbs. Dimensions are 6.5" wide, 5.25" deep, and 4.75" tall. (This model is adaptable to any tankless water heater. Please review our tankless water heater section for proper sizing.)

The patented PDV (Check Valve) is built right into the pump housing, reducing the number of external devices. It is suitable for runs up to approximately 120 feet. The pump carries a five-year warranty.

The S3 series pump is available in two configurations. The base configuration is the S3-100 Kit as shown below.

 

S3-100 Series

The S3-100 Series D’MAND Kontrols® Systems can be used with both tank and tankless water heaters on standard plumbing or dedicated return lines in existing homes, new home construction or light commercial applications. At the push of a button, or with a motion sensor in place, the D’MAND Kontrols® System activates and pumps the ambient (cool) temperature water back to the water heater saving both water and energy in the process. When the hot water arrives at the D’MAND Kontrols® System, the built-in thermistor automatically shuts the pump off and closes the IFC Valve. Now you have hot water within seconds at the fixture and anywhere else plumbed off the main line.

S3-100 models are designed for use in large homes or commercial buildings where the distance from the water heater to the farthest fixture is greater than 120 feet. The S3-100 models carry a five-year warranty and weigh 9 lbs. Dimensions are 6.5" wide, 5.25" deep, and 4.75" tall..  (This model is adaptable to any tankless water heater. Please review our tankless water heater section for proper sizing.)

 


S Series models:

S3-100 (S3-100 $770.10)

This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in stainless steel volute, 3/4" threaded stainless steel flanges, and internal check valve. Recommended for use with dedicated return lines in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 200 lineal ft. with tankless water heaters

S3-100-PF (S3-100-PF $895.10)

This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in stainless steel volute, 3/4" threaded stainless steel flanges, and internal check valve. Recommended for use with standard plumbing systems in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System.


Products
Accessories
Testimonials

Hardest part of installation was for this 82 year old geezer to get under the sink cabinet.Charles — San Antonio, TX

This is FABULOUS!Robyn — Charlotte, NC

I used to wait 90+ seconds for warm water. Now I get "hot" water instantly!! I love this and am promoting it to my subdivision. Thanks!Lea — Lithonia, GA

Works great!Paul — Denver, CO

The System works great. I only regret not installing it sooner! Thanks for taking the time to explain the installation.Peter — Alexandria, VA

Logos (Various Logos) Shopping Cart | Checkout
© 2014 Gothotwater.com