D'MAND® Products
C3-100 (C3-100 $615.00)
This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in composite volute, 3/4" CPVC threaded connections, and internal check valve. Recommended for use with dedicated return lines in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 120 lineal ft. with tankless water heaters.
C3-100-PF (C3-100-PF $740.00)
This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in composite volute, 3/4" CPVC threaded connections, and internal check valve. Recommended for use with standard plumbing systems in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 60 lineal ft.
S Series models:
S3-100 (S3-100 $755.00)
This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in stainless steel volute, 3/4" threaded stainless steel flanges, and internal check valve. Recommended for use with dedicated return lines in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 200 lineal ft. with tankless water heaters
S3-100-PF (S3-100-PF $880.00)
This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in stainless steel volute, 3/4" threaded stainless steel flanges, and internal check valve. Recommended for use with standard plumbing systems in buildings up to 4,000 sq. ft. with tank water heaters. Or pipe runs up to 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System.
BR3-200 (BR3-200 $1,180.00)
This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in lead free bronze volute, 3/4" threaded stainless steel flanges, and internal check valve. Recommended for use with dedicated return lines in buildings larger than 4,000 sq. ft. with tank water heaters. Or pipe runs over 200 lineal ft. with tankless water heaters.
BR3-200-PF (BR3-200-PF $1,305.00)
This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in lead free bronze volute, 3/4" threaded stainless steel flanges, and internal check valve. Recommended for use with standard plumbing systems in buildingslarger than 4,000 sq. ft. with tank water heaters Or pipe runs over 100 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System.
D'MAND® Accessories
-
Gold Hard Wired Buttons (HWB-G-S $7.52)
Polished Gold Standard Button specifically designed for use with D'MAND KONTROLS® System. CAT 5/6 or 22 gauge bell wire. Unlimited activation points. 5 Volt.
-
Chrome Hard Wired Buttons (HWB-CH-S $7.52)
Polished Chrome Standard Button specifically designed for use with D'MAND KONTROLS® System. CAT 5/6 or 22 gauge bell wire. Unlimited activation points. 5 Volt.
-
Wireless Receiver Transmitter Kit (WRT-KIT $63.68)
Kit specifically designed for use with D'MAND KONTROLS® System. Includes one Hard-Wired Receiver installed at the D'MAND KONTROLS® System and one Wireless Transmitter. Penetrates interior walls up to 80 ft. from the receiver. 5 Volt.
-
Wireless Transmitter (WT $23.84)
Additional Wireless Transmitters specifically designed for use with D'MAND KONTROLS® System.
Unlimited activation points. 5 Volt.
-
Hard Wired Motion Sensors (HWMSRB $87.86)
Additional Wireless Motion Sensors-Round Beam specifically designed for use with the D'MAND KONTROLS® System. Limit ten sensors per system. 12 Volt
-
Wireless Motion Sensor Curtain Beam Kit (WMSCB-KIT $288.02)
Kit specifically designed with one Hard-Wired Receiver installed at the D'MAND KONTROLS® System and one Wireless Motion Sensor- Curtain Beam. Activates instantly upon contact with curtain view beam from wall mount location. Subsequent four minute time delay. CAT 5/6 wire. 12 Volt
-
Wireless Motion Sensor Curtain Beam (WMSCB $178.65)
Additional Wireless Motion Sensors-Curtain Beam specifically designed for use with the D'MAND KONTROLS® System. Limit ten sensors per system. 12 Volt
-
Wireless Motion Sensor Round Beam Kit (WMSRB-KIT $302.57)
Kit specifically designed with one Hard-Wired Receiver installed at the D'MAND KONTROLS® System and one Wireless Motion Sensor- Round Beam. Activates instantly upon contact with 360 beam projected from ceiling mount location. Subsequent four minute time delay. CAT 5/6 wire. 12 Volt
-
Wireless Motion Sensor Round Beam (WMSRB $192.17)
Additional Wireless Motion Sensors-Round Beam specifically designed for use with the D'MAND KONTROLS® System. Limit ten sensors per system. 12 Volt
-
Button Plate White (BP-W $3.66)
White Button Wall Plate available for use with standard rough-in electrical box. (Buttons sold separately)
