SS-Series

SS3-Series Pump (Formerly the BR3-Series) 

The D'MAND Kontrols® SS-Series converts standard plumbed homes into D'MAND Kontrols® Systems. At the push of a button, the SS3-Series pumps cold water sitting in the hot water line into the cold water line and back to the water heater. The "temperature sensor" automatically shuts off the pump allowing the pump's IFC (Intergral Flow Control) Valve to close when hot water arrives at the fixture. Now you have hot water within seconds at the fixture and anywhere else plumbed off of the main line.

The SS3 series models are designed for homes greater than 4,000 square feet. They are suitable for use in most homes and small businesses. They weight 13 lbs. Dimensions are 6.5" wide, 6.25" deep, and 5.5" tall. (This model is adaptable to any tankless water heater. Please review our tankless water heater section for proper sizing.)

The patented PDV (Check Valve) is built right into the pump housing, reducing the number of external devices. It is suitable for runs up to approximately 200 feet. The pump carries a five-year warranty.

The SS3 series pump is available in two configurations. The base configuration is the SS3-200 Kit as shown below.

 

SS3-200 Series (Formerly the BR3-200) 

The SS3-200 Series D’MAND Kontrols® Systems can be used with both tank and tankless water heaters on standard plumbing or dedicated return lines in existing homes, new home construction or light commercial applications. At the push of a button, or with a motion sensor in place, the D’MAND Kontrols® System activates and pumps the ambient (cool) temperature water back to the water heater saving both water and energy in the process. When the hot water arrives at the D’MAND Kontrols® System, the built-in thermister automatically shuts the pump off and closes the IFC Valve. Now you have hot water within seconds at the fixture and anywhere else plumbed off the main line.

SS3-200 models are designed for use in large homes or commercial buildings where the distance from the water heater to the farthest fixture is greater than 120 feet. The SS3-200 models carry a five-year warranty and weigh 13 lbs. Dimensions are 6.5" wide, 6.25" deep, and 5.5" tall. (This model is adaptable to any tankless water heater. Please review our tankless water heater section for proper sizing.)

SS3-200-PFS (SS3-100-PFS $1,467.46)

This D'MAND KONTROLS® System includes an electronic circuit board, thermosensor mounted in lead free bronze volute, 3/4" threaded stainless steel flanges, and internal check valve. Recommended for use with standard plumbing systems in buildings larger than 4,000 sq. ft. with tank water heaters Or pipe runs over 200 lineal ft. between a tankless water heater and installation location of the D'MAND KONTROLS® System.


Products
Accessories
Testimonials

Hajoca was great. They looked up/found info and ordered for us. Very helpful and professional! Met ACT rep he answered our questions, he was great! Great experience all-the way around.Dianne — Hendersonville, NC

Why did I wait so long? It works Great!John H. — Sun City, AZ

My wife and I both love it! She likes the immediate hot water, and I like the $$$ savings and water savings.Kevin — Aurora, CO

Works great, love it!Marcia — Fairborn, OH

Very Satisfied - Thank you very much!!! If I move I will buy another one.Matt — Sumter, SC

Logos (Various Logos) Shopping Cart | Checkout
© 2017 Gothotwater.com